Цитата:
Сообщение от ромус
в субботу менял, нет там посадочного для уплотнительного кольца.
|
не прально выразился)
FILTER SEAL CAUTION (545RFE):
The primary oil filter seal MUST be fully installed flush against the oil pump body. DO NOT install the seal onto the filter neck and attempt to install the filter and seal as an assembly. Damage to the transmission will result. Install the new primary oil filter seal in the oil pump inlet bore. Seat the seal in the bore with the butt end of a hammer, or other suitable tool. Place replacement filter in position on valve body and into the oil pump. Install screw to hold filter to valve body. Tighten screw to 40 in. lbs. torque.