Цитата:
Сообщение от Островитянин
Тоже пришел к выводу что нужны пары пониже ~4.88 только вот думаю ставить в родные мосты. чтото морально не готов переходить на другие.
А не думал над атеку?
|
Что такое "атеку"?...
Я вот думаю - если Д44 это 8,5" то может на зад хватит и 9"... допустим с парой 4,875...
А на перед есть с точь в точь такой же парой, но 8"... хотя можно и 9"...
Я вряд ли буду ставить когда-нибудь колёса 36"-37", а для 33"-35" наверное и этих мостов должно хватить?!
Чё нашёл про наши Даны:
----------------------------------------
Dana 30
----------------------------------------
Ring Gear Diameter: 7.20"
Cover Bolts: 10
Carrier Breaks: 3.54 / 3.73
Axle Shaft Diameter: 1.16"
Axle Spline Count: 27
Max Recommended Tire Size: 33" - 35"
Notes: Dana30 can be found in both high and low pinion versions. The Dana 30 is actually surprisingly stout for it's size. It can easily handle a 33" tire, with aftermarket shafts its usually pretty safe to run 35s on them.
Can be found in the front of:
84-01 Cherokee
87-95 Wrangler
Dana 44
----------------------------------------
Ring Gear Diameter: 8.5"
Cover Bolts: 10
Carrier Breaks: 3.73 / 3.92
Axle Shaft Diameter: 1.30"
Axle Spline Count: 1972-newer 30
Max Recommended Tire Size: 37"
Notes: Dana 44s can be found in both front and rear, high and low pinon versions. It should be noted that the Rubicon Dana 44s have a weaker housing than other 44s. Most all 44s are 30 spline shafts, but be careful some early 44s came with dinky 19 spline axles.
Can be found in the front of:
73-79 1/2 Ton Chevy Trucks
73-79 3/4 Ton Chevy Trucks
72-93 1/2 Ton Dodge Trucks
72-93 3/4 Ton Dodge Trucks
67-79 1/2 Ton Ford Trucks
67-79 3/4 Ton Ford Trucks
Can be found in the rear of:
87-89 Cherokee